Make an Origami T-Shirt with a Collar: Folding Paper Art

Knoji reviews products and up-and-coming brands we think you'll love. In certain cases, we may receive a commission from brands mentioned in our guides. Learn more.
Having reverse-engineered an Origami T-Shirt I found on a bus seat, here is the method for creating this interesting folded paper object...

Ori-gami literally means "Folding Paper"

Generally the goal is to use a flat sheet of paper to create 3-dimensional objects such as flowers, animals structure or everyday objects and do so without cutting, tearing or gluing the paper although there are some easing of these restrictions.

Since paper deteriorates over time, the origins of Origami are still debatable as there are precious few remaining examples to provide provenance. It is clear however that the Japanese have embraced Origami (Japanese: "ori" = folding, "kami" = paper) most dearly, raising it to a true art form. We've all seen the 'Japanese crane' origami, -the quintessential staple subject of the Origami art. Origami paper (called "kami") is sold prepacked and often with colors, such is their love affair with the art that they provide a paper specifically dedicated to the craft.

Some months ago while riding a public transit bus I found an Origami object laying on a vacant seat. It was a folded bus transfer and in the form of a collared golf or sports shirt, a collared T-shirt. I was hooked.

The Origami T-Shirt

The folds seemed fairly easy and by reverse-engineering the folds I figured out the required steps. Here are my instructions to create your own Origami T-shirt using a rectangular piece of paper.

Begin with a Rectangular Length of Medium-Weight Paper

Step 1 and 2

Begin with a rectangular sheet of paper, roughly the dimensions of a paper dollar

Using a rectangular sheet of paper of medium thickness ('typing paper' etc.) that is at least three times longer than it is wide, place the paper with the desired 'FRONT SIDE' facing down. With blank paper this will not matter but if you are using a paper that has colors or printed designs (e.g., a coupon from a magazine, printed brochure cover or even paper currency) having a desired 'front' makes this step important. Some very interesting designs are created when using printed paper or paper currency.

In this tutorial, face down (Silver) will be the front of the finished origami T-Shirt. For clarity, the back of the shirt in this tutorial shall be tan/wheat colored.

Step 3 and 4

(missing picture)

Step 3 and 4: Unfold the lengthwise folder paper, and then fold each “wing” inwards to meet the center crease.

Unfold the lengthwise-folder sheet. Then fold each half inwards to meet evenly with the center fold created in the previous steps. Leave these 'wings' folded inwards.

Step 5: Flip Over

flip the paper over so that the wings now face the table surface

Flip the piece of paper so that the 'wings' are now facing the table surface as shown above.

Step 6: Form the Collar

with the wings facing down towards the table surface, fold-back a narrow edge on one end as shown. Crease sharply

With the folded 'wings' facing the table surface, fold back a narrow band on the desired 'top' of the shirt as shown above. Fold upwards back. Crease sharply. This will form the collar of the shirt.

Forming the Collar of the Origami T-Shirt

Step 7 and 8

Flip the unit over so that the folder collar now faces the table surface, and fold-back the collar corners to the center-line, as shown in the image

Step 7: Flip the entire work once again so that the folded collar now faces the table surface.

Our folds are becoming increasingly complex from here forward. There are just several more remaining. Study the images for each step and proceed when ready.

For Step 8 we fold a corner of the downward-facing collar around so that the tip meets the center line. Note the sloping angle that is formed. Repeat the same fold for the other side of the collar, forming a matching set of folds and completing the left and right sides of the collar. Both tips meet point-to-point at the center-line.

Body of the Origami T-Shirt

Step 9

fold bottom edge

With the collar facing upwards and away from you, visualize approximately one-thirds as shown with the red dashed lines. Fold bottom edge labeled EDGE "A" upward to meet with LINE "C" which forms a crease at "B." Using your thumbnail or a coin and by pressing firmly against a hard surface, deeply crease the fold at Crease "B."

Follow the direction "a)," "b)," and "c)," from the image above to perform this fold. Now, unfold Crease "B." Next we need to create inverted folds on each corner of Crease "B."

Forming the Sleeves of the Origami T-Shirt

Step 10

Difficult to explain, pull flaps out from behind CREASE 'B' to form sleeves.

Creating the inverted folds that form the sleeves looks difficult and it is hard to explain. There is only one way for the flaps to be folded. By pulling them out carefully and creasing, the sleeves are created. It will require some patience and experimentation to do this the first time. After that however, these folds become easy. A sharp crease at Crease "B" makes creating these sleeves much easier.

And now for the final fold:

Step 11

Fold bottom edge Crease B up and tuck under throat of collar, completing the Origami T-shirt

Bring bottom edge Crease "B" up and tuck snugly under throat of collar, hold firmly with your thumb. Crease firmly at Line "C."

This completes the Origami T-Shirt how-to tutorial

(all graphics by author)


Gayle Crabtree
Posted on Jan 31, 2012
Christine Gapuz
Posted on Jun 25, 2011
Posted on Aug 11, 2010
Judith Barton
Posted on Jul 12, 2010
Richard Wing
Posted on Jul 12, 2010
Kaleidoscope Acres
Posted on Jul 12, 2010
Rhonda Rowley
Posted on Jul 12, 2010
Simplyoj (Joy L. Carnay) Simplyoj (Joy L. Carnay)
Posted on Jul 11, 2010