Flat Plate vs. Tubular Batteries

Knoji reviews products and up-and-coming brands we think you'll love. In certain cases, we may receive a commission from brands mentioned in our guides. Learn more.
This article talks about two main types of batteries (regarding the design), explaining all main aspects and factors which are related to those specific designs. It compares their advantages and all other characteristics trying to give a full insight to p

There are basically two types of batteries: flat plate and tubular. In general, the negative plate is almost identical for both models. The main difference between them is the design. Inside the batteries, materials are the same for both designs but there are several differences in terms of performance.

The Flat Plate Batteries

This battery design is based on lead alloy plates. The finished product is a rugged battery that holds several characteristics such as:

- Good electrical efficiency and performance

- Extended life cycle

- Has a durable and tough build

- Sufficient content of pasted material, extending the life of the battery

- Sufficient reserve of lead

- Better protection against damage

- Better heat dissipation

The Tubular Plate Batteries

This design is more difficult to manufacture. The lead alloy used has the same 6-10 antimonial as the one used for flat plate ones. Compared to the manufacturing process of flat plate batteries, tubular ones have considerably more steps and the control of the process is more difficult. The characteristics of the finished product are:

- Good electrical efficiency and performance

- Moderate life cycle

- Low reserve of lead

- Low reserve of pasted material

- Sensitive to material shedding

- Sensitive to top bar breakage

The Comparison

Batteries are not simple "black boxes". Their design and materials used play a decisive role when determining the life span and durability of the cells. Both designs are commonly used in simple household appliances and electronics and industrial environments. The flat plate batteries are usually more resistant to heat. The heat dissipation is much better optimized due to the flat surface. A poor heat dissipation will cause the battery to deteriorate faster. Regular tubular batteries hold heat.

The grid of a flat plated battery is usually composed of a vast crisscross network made of lead alloy, separated with spaces filled with active material. All the areas of the pellets of active material are surrounded completely by the alloy, causing the material retention to be close to excellent, ensuring a superior conductivity. As the battery ages, lead plates become damaged due to the corrosion effect of the sulfuric acid.

On the other end, tubular plates have no reserve of lead alloy. The sulfuric acid can corrode trough the plates, causing the electrical connection to be completely or partially discontinued. As the corrosion progresses, the battery starts to lose capacity gradually. In one battery, there are usually 15 spines in a plate. If only one spine is corroded, the capacity of the battery is reduced by 6%.

The Bottom Line

It seems that the flat plate battery holds several advantages when compared with the tubular design. They seem more reliable, the life span is longer, the performance seems to be improved and less affected by performance and the design makes them easier to build. It is important to take all these aspects into consideration. Even if the materials used are almost identical, the performance differences might make one choice better than the other. Making an informed can save money. As a conclusion, the flat pasted design seems like a better choice as it delivers a higher quality product.

Author: Alex P - technology researcher for High Tech Battery Solutions


Robin K
Posted on Jun 21, 2015
Joe Roberts
Posted on Aug 19, 2014