Calcium Buildups in a Freshwater Aquarium - How Do You Remove It?
About Calcium in Aquarium
The presence of the right amount of calcium inside the freshwater tank is important to the health of the fish. Calcium deposits, however, can build up in aquariums, whether it is a glass aquarium or a plastic aquarium. Some of these may build up in aquarium lids. These calcium deposits are not just aesthetically ugly, but they are also harmful to the fish in the aquarium. This is because it contributes to the alkalinity level inside the tank. If the alkalinity level goes way up, it can upset the bilogical and chemical balance of the aquarium. Removing calcium deposits on plastic aquarium lid pieces and other parts of the aquarium is also an important part of aquarium maintenance, which should be done regularly.
Steps in Removing Calcium Deposits in an Aquarium
Before proceeding to remove the calcium deposits in the aquarium, the first step is to take the fish out from the tank and place them in another container. Then remove the water from the aquarium, as well as the other items inside, such as the rocks, plants and other Freshwater Aquariumdecorations. Make sure to have the proper materials for this job before doing this. The materials needed are a spray bottle, white vinegar, an aquarium scraper, a sponge, a rag and water for rinsing. Mix one part vinegar and two parts water solution in a spray bottle.
Spray the vinegar and water solution on all the aquarium parts where there is calcium deposit build-up. It is best to spray a lot of it to make sure that it settles nicely. You can also spray the solution on parts where there are no calcium deposits to prevent or decrease the chances of any future calcium build-up. Let the solution sit on the sprayed areas for 2 to 3 minutes before using a rag or a sponge to wipe it away.
Some calcium deposits may be a lot harder to get rid of, so there is a need to increase the amount of the vinegar in the solution. An aquarium scraper or a razor can also be utilized to remove the calcium deposits that can't be removed by simple spraying of the solution. Extra care must be observed, however, when using a razor to avoid leaving a cut mark on a plastic aquarium.
For some parts earlier removed, they can be dipped and washed in a container with the same vinegar and water solution. These parts are usually a lot harder to clean, especially the lid. In removing calcium deposits on plastic aquarium lid parts, there is sometimes a need to clean it in an area with a big container, possibly a bath tub. Make sure to rinse all of these parts before putting them back into the aquarium. Leaving a lot of the vinegar and water solution in these aquarum parts can also harm the inhabitants of the tank.
It is thus advisable for fish tank owners to learn the basics of aquarium keeping before setting up their aquarium for the first time. This will generally enable them to keep a list of what to do and what not to do to prevent the onset of chemical imbalances inside their fish tank.